The Odyssey Hazard Front BMX Hub is constructed from 6061 T6 aluminum. The Odyssey Hazard Front BMX Hub features a 14mm chromoly axle, mid-flange shell, and 4 sealed cartridge bearings.
The hazard cassette hub is made from 7075 aluminium with a heat treated 14mm hollow axle with hex ends and 4 bearings. The cassette comes with a 9t or 10t driver. A quality, affordable cassette hub.
MagnaLite front hub // Black / Gold / Red / Blue / White / Purple / Silver / Brown / Grey LTD
MagnaLite ceramic driver rear hub // Black / Gold / Red / Blue / white / Purple / Brown / Grey LTD / Orange / Green
The new Proper ceramic bearing hubs use a ceramic bush instead of the usual 3 small sealed bearings. The ceramic material is very hard wearing but also runs like a bearing so there's very little friction. These ceramic bearings will last for ages because the forces coming through from the chain is spread over a much larger area than with regular bearings... The drivers are available with 9t or 10t cogs and because the ceramic bush takes up less space the whole driver can be made smaller, which also saves weight.
6 pawl driver with 3 sealed bearings
6061 hub body, 14mm heat treated chromoly axle
36h right or left hand drive; Driver sizes: 9, 10, or 11 tooth
Reduced flanges for low profile and reduced weight
Weight: 17.03 oz with 9 tooth driver
> 6061 T6 alloy shell
> 7075-T6 alloy female axle
> 7075 alloy cones and washers
> 3/8" / 24tpi flush bolts included
> 36 hole
> Weight 190g
> 6061 T6 alloy, bi-conic design with die-cut star logo
> 7075 alloy cones and washers
> 3/8" / 24tpi flush bolts included
> Heat treated female axle, works with pegs
> 36 hole
> Weight 245g
Product
